Products
▲ Electronic/magnetic spring type, precise positioning, fast speed, shock resistance, and vibration resistance;
▲ Cable strengthening and optimization, anti bending enhancement;
▲ Enhanced and optimized protection level, with excellent waterproof and oil resistant properties;
▲ Optimized shell material, high strength, and secure fixation;
▲ NPN/PNP, automatic detection and switching output (more intelligent);
▲ The leakage current is extremely low, only 0.05mA, and multiple switches are connected in parallel without affecting normal operation;
▲ Action magnetic field range of 40-800 Gauss, sensitive and error free (1 action);
▲ Induction for optimal adjustment, accurate movement, and prevention of misoperation caused by magnetic field interference around the cylinder;
▲ Electronic/magnetic spring type, precise positioning, fast speed, shock resistance, and vibration resistance;
▲ Cable strengthening and optimization, anti bending enhancement;
▲ Enhanced and optimized protection level, with excellent waterproof and oil resistant properties;
▲ Optimized shell material, high strength, and secure fixation;
▲ NPN/PNP, automatic detection and switching output (more intelligent);
▲ The leakage current is extremely low, only 0.05mA, and multiple switches are connected in parallel without affecting normal operation;
▲ Action magnetic field range of 40-800 Gauss, sensitive and error free (1 action);
▲ Induction for optimal adjustment, accurate movement, and prevention of misoperation caused by magnetic field interference around the cylinder;
| Product Name | Electronic magnetic switch | |
| model | Two line type | NPN three wire PNP three wire |
| Induction switch form | No contact point | Non contact NPN/PNP type |
| Sensitivity of induction | 40-800 Gauss | 40-800 Gauss |
| supply voltage | 10V~28VDC | 5V~30V DC |
| Maximum switch current | 25mA~100mA | 30V/200mA Max. |
| Maximum contact capacitance | 2.8W Kax | 6.0W Max. |
| Internal consumption current | 3mA Max. | 5mA Max |
| Internal residual voltage | 2.7V Kax | 0.7V Max |
| Pull leakage current | 0.05mA Max. | 0.01mA Kax. |
| Maximum switching frequency | 1000Hz | |
| Impact resistance | 50G | |
| Vibration resistance | 9G | |
| protection circuit | Power polarity reverse protection, surge absorption protection | |
| working temperature | -10℃~70℃ | |
| Protection level | General type: IP64 Waterproof type: IP68 | |
| indicator light | Red LED | |
| Cable line | 2.85,3C, gray oil resistant PVC | |
| Product Name | Spring type tactile switch | |
| model | Two line general type | Two line high-temperature type |
| Induction switch form | There are contacts | |
| Sensitivity of induction | 60-800 Gauss | |
| supply voltage | 10V~240V AC/DC | |
| Maximum switch current | 100mA | |
| Maximum contact capacitance | 10W Max | |
| Internal consumption current | nothing | |
| Internal residual voltage | 2.5Y Max.e100mA | nothing |
| Pull leakage current | nothing | |
| Maximum switching frequency | 200Hz | |
| Impact resistance | 50G | |
| Vibration resistance | 9G | |
| protection circuit | nothing | |
| working temperature | -10℃~70℃ | |
| Protection level | IP64 | |
| indicator light | Red LED | |
| Cable line | 2.8 §, 3C, gray oil resistant PVC | |
| Note: | ||
|
1Measurement using standard magnets:S15.5×S8×5t(anisotropic plastic magnet), used to measure the sensing surface below the switch; 2、Sine wave/X、Y、Z3Axial/3 turns (in each direction)/11ms(Every time); 3Complex amplitude 1.5mm/10Hz-55Hz-10Hz (Repeat for 1 minute)/x、Y、Z3Axial/1-hour (per cycle); |
||
|
DIKC magnetic sensor |
|
Follow WeChat
Home
Official website
13570894005
E-mail